2400 and 2500 Series Firmware
Take advantage of new functionality and enhancements with the newest version of firmware.
Compatible with the following models
The 2400 and 2500 Series firmware is compatible with all models listed in the tables below:
2400A/B/C Series
| 2408C | 2408B | 2408S | 2408B-X | 2408L | 2408M | 2408AL | 2408AM |
| 2420C | 2420B | 2420S | 2420B-X | 2420L | 2420M | 2420AL | 2420AM |
| 2426C | 2426B | 2426S | 2426B-X | 2426L | 2426M | 2426AL | 2426AM |
| 2440C | 2440B | 2440S | 2440B-X | 2440L | 2440M | 2440AL | 2440AM |
2500A/B Series
| 2502B | ||
| 2508B | 2508A | 2508AS |
| 2520B | 2520A | 2520AS |
| 2526B | 2526A | 2526AS |
| 2540B | 2540A | 2540AS |
| 2550B |
Update your firmware in 3 steps:
- Download the Automation Xpress Software and install it on your PC. If you already have Automation Xpress software loaded on your PC, make sure your version is compatible with the firmware version you will be loading on your signal generator. To check compatibility, look at the firmware revision history table in the Firmware Release Notes (see table below).
- Download the signal generator's firmware file to your PC (see table below).
- Follow the firmware download procedure in the Firmware Release Notes (see table below).
| Title | Released Date | File Size and Version | Action |
|---|---|---|---|
| 2400 and 2500 Series Firmware |
October 19, 2011 | 1.6 MB | Version V4.86 |   |
| Automation Xpress Software |
November 4, 2011 | 33.8 MB | Version 3.6.0 | |
| 2400 and 2500 Series Firmware Release Note |
November 4, 2011 | 266 KB | |